Tapper and Lockover Wrench

Thread cutter Professional

Thread cutter Professional

Direct drive with pendulum chuck. For threads from M5 to M12. Can be used for thread cutting in breakthrough holes and as a direct screwdriver.

See technical details
Show variant

Thread cutter Professional 0 607 461 413

Thread cutter Professional

Your Selection

Part Number: 0 607 461 413

Technical data

The most important data

Thread and stud bolt diameter bis 10 mm
Tightening torque bis 26 Nm
No-load speed 400 1/min
Direction of rotation (R = right; L = left) R/L
Model series 400 W
Air consumption at no-load 13,5 bzw. 28,6 l/s/cfm
Weight as per EPTA 1.5 kg
Bit holder 7/16" SWF
Connecting thread G 1/4"
Hose inner diameter 10 mm
Thread cutter