Technical data
Table saw | GTS 10 XC | GTS 10 XC | GTS 10 XC | |
|---|---|---|---|---|
Article number | 3 601 M30 403 | 3 601 M30 432 | 3 601 M30 462 | |
Rated power input | W | 2000 | 2000 | 1650 |
Rated voltage | V | 220–240 | 230 | 110 |
Frequency | Hz | 50–60 | 50–60 | 50–60 |
No-load speed | min–1 | 4200 | 4200 | 4200 |
Starting current limitation | ● | ● | ● | |
Run-out brake | ● | ● | ● | |
Overload protection | ● | ● | ● | |
Weight according to EPTA-Procedure 01:2014 | kg | 35.0 | 35.0 | 35.0 |
Protection class |
|
|
| |
Dimensions (including detachable parts of the tool) | ||||
Width x depth x height | mm | 783 x 771 x 343 | 783 x 771 x 343 | 783 x 771 x 343 |
Dimensions of suitable saw blades | ||||
Saw blade diameter | mm | 254 | 254 | 254 |
Base blade thickness | mm | < 2.2 | < 2.2 | < 2.2 |
Min. tooth thickness/offset | mm | > 2.4 | > 2.4 | > 2.4 |
Hole diameter | mm | 30 | 30 | 30 |
/ IITable saw | GTS 10 XC | GTS 10 XC | |
|---|---|---|---|
Article number | 3 601 M30 443 | 3 601 M30 4B3 | |
Rated power input | W | 2000 | 2000 |
Rated voltage | V | 220–240 | 220 |
Frequency | Hz | 50–60 | 60 |
No-load speed | min–1 | 4200 | 4200 |
Starting current limitation | ● | ● | |
Run-out brake | ● | ● | |
Overload protection | ● | ● | |
Weight according to EPTA-Procedure 01:2014 | kg | 35.0 | 35.0 |
Protection class |
|
| |
Dimensions (including detachable parts of the tool) | |||
Width x depth x height | mm | 783 x 771 x 343 | 783 x 771 x 343 |
Dimensions of suitable saw blades | |||
Saw blade diameter | mm | 254 | 254 |
Base blade thickness | mm | < 2.2 | < 2.2 |
Min. tooth thickness/offset | mm | > 2.4 | > 2.4 |
Hole diameter | mm | 25.4 | 25.4 |
Maximum workpiece dimensions: see Maximum workpiece dimensions
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.