Technical Data
Angle Grinder | GWS 18V-180 P | |
|---|---|---|
Article number | 3 601 JH6 L.. | |
Rated voltage | V= | 18 |
Rated no-load speedA) | min–1 | 7000 |
No-load speedB) | min–1 | 6100 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 180 |
Grinding spindle thread | M 14 | |
Max. thread length of grinding spindle | mm | 22 |
KickBack Control | ● | |
Soft start | ● | |
Restart protection | ● | |
Run-out brake | ● | |
Weight according to EPTA-Procedure 01:2014C) | kg | 2,9–4,2 |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operationD) and during storage | °C | –20 to +50 |
Compatible rechargeable batteries | GBA 18V... | |
Recommended rechargeable batteries for maximum performance | ProCORE18V... | |
Recommended chargers | GAL 18... |
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Measured at 20–25 °C with rechargeable battery ProCORE18V 8.0Ah and depending on the battery's state of charge as well as the tool's operating temperature
- C)
Depends on rechargeable battery (4) and protective guard ((9), (10)) in use
- D)
Limited performance at temperatures < 0 °C
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.