Technical Data
Cordless impact screwdriver | GDS 18V-450 HC | GDS 18V-450 PC | |
---|---|---|---|
Article number | 3 601 JK4 0.. | 3 601 JK4 1.. | |
Rated voltage | V= | 18 | 18 |
No-load speedA) | |||
| min–1 | 1 000 | 1 000 |
| min–1 | 1 500 | 1 500 |
| min–1 | 2 300 | 2 300 |
Impact rateA) | |||
| min–1 | 1 900 | 1 900 |
| min–1 | 2 500 | 2 500 |
| min–1 | 3 300 | 3 300 |
TorqueA) | |||
| Nm | 250 | 250 |
| Nm | 330 | 330 |
| Nm | 450 | 450 |
Max. tightening torqueA) | Nm | 450 | 450 |
Max. loosening torqueA) | Nm | 800 | 800 |
Machine screw diameter | mm | M10–M20 | M10–M20 |
Tool holder | ∎ ½" | ∎ ½" | |
Weight according to | kg | 1.9–3.0 | 1.9–3.0 |
Recommended ambient temperature during charging | °C | 0 to +35 | 0 to +35 |
Permitted ambient temperature during operation and during storage | °C | –20 to +50 | –20 to +50 |
Recommended rechargeable batteries | GBA 18V... | GBA 18V... | |
Recommended chargers | GAL 18... | GAL 18... | |
Data transfer | |||
Bluetooth®C) | Bluetooth® 4.1 | Bluetooth® 4.1 | |
Signal interval | s | 8 | 8 |
Max. signal rangeD) | m | 30 | 30 |
- A)
Measured at 20–25 °C with rechargeable battery ProCORE18V 8.0Ah.
- B)
Measured with GBA 18V 1.5Ah and GBA 18V 12.0Ah.
- C)
The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).
- D)
The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.