Start-up

Make sure you inform yourself about the applicable regulations/laws on how to handle harmful types of dust in your country.

The dust extractor may be used for vacuuming and extracting the following materials:

Dusts with an exposure limit of ≥ 0.1 mg/m³

The dust extractor must categorically not be used in potentially explosive areas.

Make sure that the working area is safe.

Ensure that the work area is clean and tidy to minimise the risk of tripping.

Before extraction, ensure that the battery compartment cover is securely closed.

Note: In order to comply safely with dust class M and to ensure a maximum application time ProCORE batteries with a capacity of 8 Ah or 12 Ah are recommended.

To ensure optimum suction power, you must always fully unwind the vacuum hose (20).

Ensure that the dust extractor is always properly closed.

Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.

Switching On and Off

To switch on the dust extractor, turn the on/off switch (14) to position 1.

To switch on the Auto-Start function, turn the on/off switch (14) to position . The Auto-Start function indicator (4) lights up. The dust extractor can be started automatically if it is connected to a power tool via Auto-Start Remote GCT ….

To switch off the dust extractor, turn the on/off switch (14) to position 0.