Technical Data
Combination saw | GTM 12 JL | GTM 12 JL | |
|---|---|---|---|
Article number | 3 601 M15 0.. | 3 601 M15 061 | |
Rated power input | W | 1800 | 1650 |
No-load speed | min–1 | 3800 | 3700 |
Laser type | nm | 650 | 650 |
mW | < 1 | < 1 | |
Laser class | 2 | 2 | |
Weight according to EPTA-Procedure 01:2014 | kg | 21.1 | 21.1 |
Protection class |
|
| |
Dimensions of suitable saw blades | |||
Saw blade diameter | mm | 300–305 | 300–305 |
Base blade thickness | mm | 1.5–2.0 | 1.5–2.0 |
Max. cutting width | mm | 3.0 | 3.0 |
Hole diameter | mm | 30 | 30 |
/ IIThe specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Permissible workpiece dimensions (maximum/minimum) mitre saw: see Permissible workpiece dimensions
Permissible workpiece dimensions (maximum/minimum) table saw: see Setting the Saw Blade Height (see figure 
B)
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.