Maintenance and Cleaning
- To ensure safe and efficient operation, always keep the dust extractor and the ventilation slots clean.
Cleaning the Filters
Regularly emptying the dust container and cleaning the filters will ensure optimum suction power. If suction power is not achieved after that, the vacuum cleaner is to be brought to the after-sales service.
Removing/changing the filter (see figures X–Y)
Replace the damaged pleated filter immediately.
- Turn the filter holder (29) as far as possible in the direction of rotation
and take the filter holder, together with the main filter (19), out of the top part of the vacuum cleaner (7).
- Take the dirty/damaged main filter (19) out of the filter holder (29).
- Brush the folds of the main filter (19) with a soft brush.
or
Replace the main filter (19) if damaged. - Place the filter holder (29) on the cleaned/new main filter (19).
- Place the filter holder (29), together with the main filter (19), over the filter basket (30) and turn the filter holder (29) as far as possible in the direction of rotation
.
- Put the top part of the vacuum cleaner (7) on and close the catches (8).
- Open the catches (8) and remove the top part of the vacuum cleaner (7).
Cleaning the container
- Wipe the container (1) from time to time using a non-abrasive off-the-shelf cleaning product and leave it to dry.