Technical Data

Angle Grinder

GWS 24-180 P

GWS 24-230 P

GWS 24-180 JZ

GWS 24-230 JZ

GWS 24-230 PZ

Article number

‎3 601 HC2 1..‎

‎3 601 HC3 1..‎

‎3 601 HC2 3..‎

‎3 601 HC3 3..‎

‎3 601 HC3 4..‎

Rated power input

W

2400

2400

2400

2400

2400

Rated speed

min–1

8500

6500

8500

6500

6500

Max. grinding disc diameter

mm

180

230

180

230

230

Grinding spindle thread

M 14

M 14

M 14

M 14

M 14

Max. thread length of grinding spindle

mm

25

25

25

25

25

Restart protection

–

–

●

●

●

Soft start

–

–

●

●

●

Overload protection

–

–

●

●

●

Weight according to EPTA-Procedure 01:2014

  • with low-vibration auxiliary handle

kg

5.7

5.9

5.8

6.0

6.0

  • with standard auxiliary handle

kg

5.6

5.8

5.7

5.9

5.9

Protection class

/ II

/ II

/ II

/ II

/ II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Only for GWS 24-180 P and GWS 24-230 P:

The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occasional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Zactual = 0.16 Ω. The user must make sure, that the connection point, with the impedance Zmax, on which the appliance shall be plugged in meets the impedance requirement: Zactual ≥ Zmax. If Zmax is unknown, determine Zmax in consultation with the network supplier or supply authority.