Checking and Adjusting the Basic Settings

To ensure precise cuts, the basic settings of the power tool must be checked and adjusted as necessary after intensive use.
Experience and suitable special tools are required for this.

A Bosch after-sales service point will handle this work quickly and reliably.

Aligning the mitre angle indicator (see figure U)

Checking

The angle indicator(58) must be in line with the 0° mark of the scale (21).

Setting

  • Loosen the screw (59) using a cross-headed screwdriver and align the angle indicator along the 0° mark.
  • Retighten the screw.

Aligning the Angle Indicator (Vertical) (see figure V)

Checking

The angle indicator(28) must be in line with the 0° mark of the scale (27).

Setting

  • Loosen the screw (60) using a cross-headed screwdriver and align the angle indicator along the 0° mark.
  • Retighten the screw.