Technical data
Angle Grinder | GWS 2000 J | GWS 2000 P | GWS 2200 J | GWS 2200 P | GWS 2400 J | GWS 2400 P | |
|---|---|---|---|---|---|---|---|
Article number | 3 601 HF2 0.. | 3 601 HF2 1.. | 3 601 HF4 0.. | 3 601 HF4 1.. | 3 601 HF4 2.. | 3 601 HF4 3.. | |
Rated power input | W | 2000 | 2000 | 2200 | 2200 | 2400 | 2400 |
Rated speed | min−1 | 6500 | 6500 | 6500 | 6500 | 6500 | 6500 |
Max. grinding disc diameter | mm | 230 | 230 | 230 | 230 | 230 | 230 |
Grinding spindle thread | M14 | M14 | M14 | M14 | M14 | M14 | |
Max. thread length of grinding spindle | mm | 25 | 25 | 25 | 25 | 25 | 25 |
Restart protection | ● | – | ● | – | ● | – | |
Soft start | ● | – | ● | – | ● | – | |
Weight according to EPTA-Procedure 01:2014 | |||||||
| kg | 5.2 | 5.1 | 5.5 | 5.4 | 5.5 | 5.4 |
| kg | 5.1 | 5.0 | 5.4 | 5.3 | 5.4 | 5.3 |
Protection class |
|
|
|
|
|
| |
/IIThe specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Notes on mains connection requirements for GWS 2000 P/GWS 2200 P/GWS 2400 P:
The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occasional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Zactual = 0.18 Ω. The user must make sure, that the connection point, with the impedance Zmax, on which the appliance shall be plugged in meets the impedance requirement: Zactual ≥ Zmax. If Zmax is unknown, determine Zmax in consultation with the network supplier or supply authority.