Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Keyed chuck with automatic lock |
(2) | "Drilling/impact drilling" selector switch |
(3) | Rotational direction switch |
(4) | Lock-on button for on/off switch |
(5) | On/off switch |
(6) | Speed preselection thumbwheel |
(7) | Depth stop |
(8) | Gear selector switch |
(9) | Wing bolt for depth stop adjustment |
(10) | Auxiliary handle (insulated gripping surface) |
(11) | Handle (insulated gripping surface) |
(12) | Chuck key |
(13) | Screwdriver bitA) |
(14) | Universal bit holderA) |
(15) | Chuck key for keyed chuck with manual lockA) |
(16) | Keyed chuck with manual lockA) |
(17) | Open-ended spannerB) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.
- B)
Commercially available (not included in the scope of delivery)