Basic Settings Menu

In the Basic settings menu, you can find the following basic settings:

  • Changing the reference level  see Selecting the Reference Level
  • Switching audio signals on and off
  • Switching Vibration on and off
  • Setting display brightness
  • Switching on and off battery saver mode
  • Changing the unit of measurement
  • Setting the language
  • Grade measurement calibration see Accuracy Check
  • Calling up Device Information
  • Factory settings
  • Deleting Memory
  1. Press the  button to open the Basic settings menu.
  2. Use the  button or  button to select the required setting.
  3. To confirm a selection, press the  button or the button.
  4. To exit the Basic settings menu, briefly press the  button.

The sound is switched on by default.

  1. Press the  button to call up the Basic settings menu.
  2. Select .
  3. To change the selection, press the  button or the button.
  4. To confirm the selection, press the  button or the button.
  5. To exit the Basic settings menu, briefly press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

The vibration function is switched on by default.

The vibration function of the measuring tool can be a useful aid, for example in noisy environments. Two short vibrations indicate a successful measurement; one long vibration indicates a measurement error.

  1. Press the  button to call up the Basic settings menu.
  2. Select .
  3. To change the selection, press the  button or the button.
  4. To confirm the selection, press the  button or the button.
  5. To exit the Basic settings menu, briefly press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

The brightness of the display can be adjusted to the environmental conditions with several settings.

  1. Press the  button to call up the Basic settings menu.
  2. Select .
  3. To change the selection, press the  button or the button.
  4. To confirm the selection, press the  button or the button.
  5. To exit the Basic settings menu, briefly press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

Battery saver mode is switched off by default. When battery saver mode is switched on, sound and vibration are deactivated and the display brightness is reduced. This extends the battery runtime.

  1. Press the  button to call up the Basic settings menu.
  2. Select .
  3. To change the selection, press the  button or the button.
  4. To confirm the selection, press the  button or the button.
  5. To exit the Basic settings menu, briefly press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

Basic setting is the unit of measurement "m" (metres). Six different units of measurement are available. Set the appropriate unit of measurement for your purposes.

  1. Press the  button to call up the Basic settings menu.
  2. Select .
  3. To change the selection, press the  button or the button.
  4. To confirm the selection, press the  button or the button.
  5. To exit the Basic settings menu, briefly press the button 
  1. The selected setting remains saved after you switch off the measuring tool.

When switching on the measuring tool for the first time, you will be prompted to set your preferred language for the display text.

You can change the selected language at any time.

  1. Press the  button to call up the Basic settings menu.
  2. Select for further settings.
  3. Select .
  4. To change the selection, press the  button or the button.
  5. To confirm the selection, press the  button or the button.
  6. To exit the Basic settings menu, briefly press the  button.
  1. The selected setting remains saved after you switch off the measuring tool.

Here you will find information about the measuring tool, such as the serial number, software version and licences.

  1. Press the  button to call up the Basic settings menu.
  2. Select for further settings.
  3. Select .
  4. To exit the Basic settings menu, briefly press the  button.

This function is used to reset the measuring tool to factory settings. After carrying out a reset, you will be prompted to set your preferred language for the display.

  1. Press the  button to call up the Basic settings menu.
  2. Select for further settings.
  3. Select .
  4. To reset the measuring tool, select and confirm with the  button or the  button.
  5. To exit the Basic settings menu, briefly press the  button.

  1. Press the  button to call up the Basic settings menu.
  2. Select for further settings.
  3. Select .
  4. To delete the memory, select with the button or with the button and confirm with the  button or the  button.
  5. All measured values are deleted.