Sawing

• Firmly clamp the workpiece as appropriate for its dimensions.
• Set the required mitre and/or bevel angle.
• Switch on the power tool.
• Press the button (17) and slowly guide the tool arm downwards using the handle (18).
• Saw through the workpiece applying uniform feed.
• Switch off the power tool and wait until the saw blade has come to a complete stop.
• Slowly guide the tool arm upwards.

When sawing curved or round workpieces, these must be especially secured against slipping. At the cutting line, there should be no gap between the workpiece, fence and saw table.

If necessary, you will need to manufacture special fixtures.