Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Fence |
(2) | Adjustable fence |
(3) | Standard 47°, 45°, 33.9° and 22.5° bevel angle stops |
(4) | Scale for bevel angle |
(5) | Angle indicator for right-hand bevel angle range |
(6) | Locking screw for slide device |
(7) | Spacer for slide device |
(8) | Clamping lever for all bevel angles |
(9) | Speed regulatorA) |
(10) | Transport safety lock |
(11) | Transport handle |
(12) | Protective guard |
(13) | Handle |
(14) | Lock-off function for on/off switch |
(15) | Laser protection cap |
(16) | Retracting blade guard |
(17) | Guide roller |
(18) | Clamping screw for saw table extension |
(19) | Mounting holes |
(20) | Saw table |
(21) | Insert plate |
(22) | Locking clamp |
(23) | Locking knob for various mitre angles |
(24) | Mitre pre-setting lever |
(25) | Tilt protector |
(26) | Angle indicator for mitre angles |
(27) | Detents for standard mitre angles |
(28) | Scale for mitre angles |
(29) | Saw table extension |
(30) | Recessed handles |
(31) | Holes for screw clamp |
(32) | SDS bolt |
(33) | On/off switch |
(34) | On/off switch for laser (cutting line indication) |
(35) | Laser warning label |
(36) | Chip ejector |
(37) | Slide device |
(38) | Locking screw for the adjustable fence |
(39) | Hex key (6 mm/4 mm) |
(40) | Screw clamp |
(41) | Depth stop adjusting screw |
(42) | Depth stop |
(43) | Spindle lock |
(44) | Angle indicator for left-hand bevel angle range |
(45) | Stop for standard 0° bevel angle |
(46) | Chip deflector |
(47) | Hex socket screw for mounting the saw blade |
(48) | Clamping flange |
(49) | Saw blade |
(50) | Inner clamping flange |
(51) | Threaded rod |
(52) | Wing bolt |
(53) | Laser beam outlet aperture |
(54) | Length stop |
(55) | Locking screw for length stop |
(56) | Clamping screw for length gauge |
(57) | Screws for insert plate |
(58) | Set screw for laser positioning (right of the saw blade) |
(59) | Hex key (2.5 mm) |
(60) | Set screw for laser positioning (left of the saw blade) |
(61) | Screw for laser protection cap |
(62) | Fastening screw for laser mounting plate |
(63) | Fastening screw for laser housing |
(64) | Stop screw for 0° bevel angle |
(65) | Stop screw for left-hand bevel angle range |
(66) | Stop screw for right-hand bevel angle range |
(67) | Set screws for mitre angle scale |
(68) | Screw for mitre angle indicator |
(69) | Hook-and-loop strap |
- A)
Not available in all country-specific versions.