Fitting individual components
- Carefully remove all parts included in the delivery from their packaging.
- Remove all packing material from the power tool and the accessories provided.
Fitting the extension bar (see figure A)
The free end of long and heavy workpieces must have something placed underneath it or be supported.
To extend the saw table further, extension bars can be mounted both to the left or right of the power tool.
- Unscrew the securing screw (38) from the extension bar with a cross-headed screwdriver.
- Tilt the power tool.
- Push the extension bars (21) on both sides of the power tool all the way into the corresponding drill holes .
- For the pull-out safety device, screw the securing screw (38) back into the extension bar.