Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Dust bag |
(2) | Protective guard |
(3) | Transport handle |
(4) | Handle |
(5) | Lock-off function for on/off switch |
(6) | Laser warning label |
(7) | Laser protection cap |
(8) | Laser beam outlet aperture |
(9) | Retracting blade guard |
(10) | Length gauge |
(11) | Fence |
(12) | Saw table |
(13) | Clamping screw for extension bar |
(14) | Insert plate |
(15) | Locking knob for various mitre angles |
(16) | Mitre pre-setting lever |
(17) | Angle indicator for mitre angles |
(18) | Scale for mitre angles |
(19) | Mounting holes |
(20) | Recessed handles |
(21) | Extension bar |
(22) | Screw clamp |
(23) | Adjustable fence |
(24) | Scale for bevel angle |
(25) | Angle indicator (vertical) |
(26) | Guide roller |
(27) | Chip deflector |
(28) | Spindle lock |
(29) | On/off switch |
(30) | On/off switch for laser (cutting line indication) |
(31) | Chip ejector |
(32) | Hex key |
(33) | Clamping handle for various bevel angles |
(34) | Transport safety lock |
(35) | Holes for screw clamp |
(36) | Wing bolt for fixing the guide rail for length gauge |
(37) | Guide rail for length gauge |
(38) | Securing screw for extension bar |
(39) | Hex socket screw for mounting the saw blade |
(40) | Clamping flange |
(41) | Saw blade |
(42) | Inner clamping flange |
(43) | Wing bolt for fixing the adjustable fence |
(44) | Wing bolt for adjusting the height of the threaded rod |
(45) | Threaded rod |
(46) | Clamping screw for length gauge |
(47) | Screws for insert plate |
(48) | Hex socket screw for fence |
(49) | Screw for mitre angle indicator |
(50) | Knurled screw for laser protection cap |
(51) | Laser lens cover |