Fitting individual components

Carefully remove all parts included in the delivery from their packaging.
Remove all packing material from the power tool and the accessories provided.

For ease of assembly when fitting the tool elements that are provided, be aware that the power tool is supplied in the transport position.

Fitting the saw table extensions (see figure A1)

To extend the saw table further, saw table extensions can be mounted both to the left or right of the power tool.

Unscrew the securing screws (43) from the saw table extensions with a cross-headed screwdriver.
Tilt the power tool.
Push the saw table extensions (16) on both sides of the power tool all the way into the corresponding drill holes.
For the pull-out safety device, screw the securing screws (43) back into the saw table extensions.

Installing Workpiece Supports (see figure A2)

The workpiece supports (17) can be positioned left, right or in front of the power tool. The flexible connector system enables a multitude of extension or expansion variants (see figure G).

Insert the workpiece support (17) into the openings (44) on the power tool or into the openings (45) of the second workpiece support as required.

Never carry the power tool using the workpiece supports.
Only use the transport devices to transport the power tool.