Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Stroke rate preselection thumbwheel |
(2) | On/off switch |
(3) | On/off switch locking mechanism |
(4) | Hex key (5 mm) |
(5) | Extraction hose |
(6) | Extraction outlet |
(7) | Base plate |
(8) | Saw blade fastening screw |
(9) | Guide roller |
(10) | Saw blade |
(11) | Shock protection guard |
(12) | Hood for dust extraction |
(13) | Saw blade receptacle |
(14) | Handle (insulated gripping surface) |
(15) | Anti-splinter guardA) |
(16) | Base plate screw |
(17) | Scale for mitre/bevel angles |
(18) | Profiled plate for base plate fastening |
(19) | Positioning cam |
(20) | Opening for positioning cam |
(21) | Standard hole for base plate fastening |
(22) | Hole for sawing close to edges |
(23) | Guide for parallel guide |
(24) | Locking screw for parallel guideA) |
(25) | Parallel guide with circle cutterA) |
(26) | Circle cutter centring tipA) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.