Speed preselection
(GWS 14-125 S / GWS 17-125 S / GWS 17-125 TS / GWS 17-125 S INOX / GWS 17-150 S / GWS 17-125 SB / GWS 17-125 PS / GWS 17-150 PS / GWS 17-125 PSB)
You can preselect the required speed using the speed preselection thumbwheel (5), even during operation, provided the dust filter (4) is not fitted. Otherwise remove the dust filter (4) beforehand. The information in the table below describes the recommended values.
Material | Application | Application tool | Thumbwheel position |
|---|---|---|---|
Metal | Removing paint | Sanding sheet | 2–3 |
Metal | Brushing, removing rust | Cup brush, abrasive disc | 3 |
Stainless steel | Grinding | Grinding disc/fibre disc | 4–6 |
Metal | Rough grinding | Grinding disc | 6 |
Metal | Cutting | Cutting disc | 6 |
Stone | Cutting | Diamond cutting disc | 6 |
- The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.
Level | GWS 14-125 S | GWS 17-125 S INOX | GWS 17-125 TS |
|---|---|---|---|
1 | 2800 | 1900 | 2400 |
2 | 4500 | 3300 | 4100 |
3 | 6300 | 4400 | 5400 |
4 | 8200 | 5400 | 6700 |
5 | 9800 | 6500 | 8000 |
6 | 11,500 | 7800 | 9700 |
The values specified for speed levels are guide values.