Technical Data
Cordless impact screwdriver | GDR 18V-220 C | |
|---|---|---|
Article number | 3 601 JL6 0.. | |
Rated voltage | V= | 18 |
No-load speedA) | ||
| min–1 | 0–800 |
| min–1 | 0–2300 |
| min–1 | 0–3400 |
Impact rateA) | ||
| min–1 | 0–1500 |
| min–1 | 0–3400 |
| min–1 | 0–4000 |
|
Max. tightening torqueA) | Nm | 220 |
Machine screw diameter | mm | M6–M16 |
Tool holder | ¼" internal hexagon | |
Weight according to | kg | 1.3–2.4 |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operation and during storage | °C | –20 to +50 |
Recommended rechargeable batteries | GBA 18V... | |
Recommended chargers | GAL 18... | |
Data transfer | ||
Bluetooth®C) | Bluetooth® 4.1 (Low Energy) | |
Signal interval | s | 8 |
Max. signal rangeD) | m | 30 |
- A)
Measured at 20–25 °C with rechargeable battery ProCORE18V 4.0Ah.
- B)
Depends on battery in use
- C)
The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).
- D)
The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.