Inserting and removing the Battery (see figure A)

Do not use force to insert the battery. The battery is designed in such a way that it can only be inserted into the vacuum cleaner when it is in the right position.

Keep the battery compartment and the battery bay clean and dry at all times to ensure good, safe operation.

Press the release button (19) to open the battery compartment cover (18).
Slide the battery (31) into the battery bay (30) until it audibly clicks into place.
To remove the battery (31), press the release button on the battery and pull it out of the battery bay (30).
Close the battery compartment cover (18).

Note: Due to the filter cleaning system, closing the battery compartment cover requires the use of increased force.