Fitting/attaching the vacuum hose

Fitting the vacuum hose (see figure D)

Pull the sealing plug (11) out of the hose adapter (10).

Attach the vacuum hose (20) to the hose adapter (10) and turn it clockwise as far as it will go.

Always seal the extraction connection with the sealing plug whenever you remove the vacuum hose. This prevents dust from escaping.

Attaching the Vacuum Hose to the Dust Extractor (see figure E)

Wrap the fitted vacuum hose (20) around the dust extractor. Pull the pull strap (9) down and hook it into one of the 3 grooves you can reach out of the total 15 grooves.