Changing/Inserting the Dust Bag (see figure A)
- Open the catches (10) and remove the dust extractor lid (3).
- Pull the full dust bag (11) backwards out of the connection flange. Close the opening in the dust bag by turning down the top. Take the closed dust bag out of the vacuum cleaner.
- Place the new dust bag (11) over the dust extractor's connection flange. Make sure that the entire length of the dust bag (11) touches the inside wall of the container (9). Put the top part of the dust extractor (3) on.
- Close the catches (10).
You should use a dust bag (11) for dry extraction. Using a dust bag (11) keeps the pleated filter (12) clear for longer, the suction power is maintained for longer and it is easier to dispose of dust.