Electromagnetic filter cleaning (SFC)
The tool is equipped with electromagnetic filter cleaning, which removes dust adhering to the pleated filter (12).
The filter cleaning function should be activated at the very latest when the suction power is no longer sufficient.
How often filter cleaning needs to be carried out will depend on the type and quantity of dust that has been extracted. With regular use, the maximum conveying capacity will be maintained for longer.
- Set the mode selector switch (4) to the "electromagnetic filter cleaning (SFC)" symbol. Any power tools connected must be switched off.
The dust extractor vibrates for approx. 10 seconds and automatically switches off. - Wait briefly before resuming suction to allow the dust to settle in the container.