Changing the Tool (see figures A–B)
- Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be removed for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.
- When working with an application tool, pay attention that the application tool is connected securely to the tool holder. When the application tool is not securely connected with the tool holder, it can come off during application.
Slide the application tool (10) onto the square drive of the tool holder (1).
Removing the Application Tool (see figure B)
GDS 18V-450 PC:
A pin secures application tools in the tool holder to ensure they do not accidentally come loose.
To remove the application tool, push in the pin with an appropriate auxiliary tool.