Transport (see figure g)

Pull the plug out of the socket before carrying out any work on the power tool.

Bring the power tool into the table saw work position.
Position the parallel guide (61) completely under the protective guard (63).
To secure the parallel guide, push the clamping handle (64) down.
Fix the push stick to the pins (67).
Insert the lower saw blade cover (66) into the saw table (22).
Remove all accessories that cannot be securely fitted to the power tool.
If possible, transport unused saw blades in an enclosed container.
To lift or transport the power tool, hold it by the recessed handles (4) on either side of the saw table (22).

Only use the transport devices to transport the power tool and never the protective devices.