Maintenance and Cleaning

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.

Always remove dust and chips after working by blowing out with compressed air or using a brush.

Lubricant:
SAE 10/SAE 20 engine oil

  • Oil the power tool as necessary at the points indicated.

An authorised Bosch after-sales service centre will handle this work quickly and reliably.

Dispose of lubricants and cleaning products in an environmentally friendly manner, taking legal regulations into account.

Measures implemented by the manufacturer:

  • Soft start
  • Provided with a saw blade specially developed for noise reduction

Measures implemented by the operator:

  • Low-vibration mounting on a stable work surface
  • Use of saw blades with noise-reducing functions
  • Regular cleaning of the saw blade and power tool

Accessories

Article number

Angle guide

2 610 015 508

Push stick

1 600 A02 2D7

Europe/Israel

Saw blades for wood and fibreboard, panels and strips

Article number

Optiline for Wood

Saw blade 254 x 2.8/1.8 x 30 mm, 40 teeth

2 608 640 443

Saw blade 254 x 2.8/1.8 x 30 mm, 60 teeth

2 608 640 444

Saw blade 254 x 2.5/1.8 x 30 mm, 80 teeth

2 608 640 437

Asia/Africa

Saw blades for wood and fibreboard, panels and strips

Article number

254 x 25.4 mm saw blade, 40 teeth

‎ ‎2 608 640 901‎

254 x 25.4 mm saw blade, 60 teeth

‎ ‎2 608 640 902‎