Technical data
Digital laser measure | UniversalDistance 30 | UniversalDistance 50 |
|---|---|---|
Article number | 3 603 F72 5.. | 3 603 F72 8.. |
Measuring rangeA) | 0.05–30 m | 0.05–50 m |
Measuring accuracyB) | ±2.0 mm | ±2.0 mm |
Smallest display unit | 1 mm | 1 mm |
General | ||
Operating temperature | –10 °C to +40 °C | –10 °C to +40 °C |
Storage temperature | –20 °C to +70 °C | –20 °C to +70 °C |
Relative air humidity max. | 90 % | 90 % |
Max. altitude | 2000 m | 2000 m |
Pollution degree according to IEC 61010-1 | 2C) | 2C) |
Laser class | 2 | 2 |
Laser type | 635 nm, < 1 mW | 635 nm, < 1 mW |
Divergence of the laser beam | < 1.5 mrad (full angle) | < 1.5 mrad (full angle) |
Automatic switch-off after approx. | ||
| 20 s | 20 s |
| 5 min | 5 min |
Weight according to EPTA-Procedure 01:2014 | 0.08 kg | 0.08 kg |
Dimensions | 100 × 42 × 22 mm | 100 × 42 × 22 mm |
Batteries | 2 × 1.5 V LR03 (AAA) | 2 × 1.5 V LR03 (AAA) |
Battery life approx. | ||
| 10,000 | 10,000 |
| 2.5 h | 2.5 h |
- A)
When measuring from front edge. In unfavourable conditions such as very strong lighting, a temperature greatly deviating from 20 °C or a poorly reflecting surface, the measuring range can be restricted.
- B)
This applies for high reflectivity of the target (e.g. wall painted white), weak background lighting and a 20 °C operating temperature. In addition a deviation of ±0.05 mm/m needs to be taken into account. In unfavourable conditions such as strong lighting, high altitudes or a poorly reflecting surface, and at a 20 °C operating temperature, the deviation can be ±4 mm. In addition, a deviation of ±0.15 mm/m must be taken into account.
- C)
Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
- D)
At an operating temperature of 20 °C
The serial number (11) on the type plate is used to clearly identify your measuring tool.
