Memory Function

The value or end result of each completed measurement is automatically saved. The last 30 values (measured values or end results) are saved. If the memory is full, the oldest value will be overwritten. The oldest value is at position 1 in the memory, the newest value at position 30 (for 30 available memory values).

  1. Press the  button to open the Functions menu.
  2. Select the memory function  and confirm the selection with the  button.
  3. The last value will be displayed.
  4. Press the  button or  button to scroll through the saved values.

The number of the memory value is shown at the top of the display, and the symbol of the corresponding measuring function is shown on the left. If there is no value available in the memory, "0.000" is shown at the bottom of the display and "0" at the top.

Deleting Memory Values

  1. To delete the displayed value, press the  button.
  2. Confirm with the  button.

To delete all saved values, select the Delete memory menu item in the Basic settings menu. see Deleting Memory