Twist Drill Bits

HSS Twist Drill Bit Cobalt

HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel

New
HSS Twist Drill Bit Cobalt
HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel

Product highlights

HSS Twist Drill Bits Cobalt Sets

HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel

  • Cobalt alloy and fully ground HSS provide wear resistance and heat protection
  • Two cutters and two flutes remove chips quickly to make the bits last even longer
  • Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8
Go to product range

Product descriptions

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.

The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.

HSS Twist Drill Bit Cobalt
HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel

Cobalt alloy and fully ground HSS provide wear resistance and heat protection

Two cutters and two flutes remove chips quickly to make the bits last even longer

Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8

Product range

Please click on the arrow next to any of the product variations to see more information and buying options.
2 Available product variations
Part number Diameter mm Working length mm Set dimension(s) mm Pack quantity
2 608 587 014
1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 / 7.0 / 7.5 / 8.0 / 8.5 / 9.0 / 9.5 / 10.0 12 / 18 / 24 / 30 / 33 / 39 / 43 / 47 / 52 / 57 / 57 / 63 / 69 / 69 / 75 / 75 / 81 / 81 / 87 172.0 x 115.0 x 42 19 Pcs
2 608 587 018
1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 / 7.0 / 7.5 / 8.0 / 8.5 / 9.0 / 9.5 / 10.0 / 10.5 / 11.0 / 11.5 / 12.0 / 12.5 / 13.0 12 / 18 / 24 / 30 / 33 / 39 / 43 / 47 / 52 / 57 / 57 / 63 / 69 / 69 / 75 / 75 / 81 / 81 / 87 / 87 / 94 / 94 / 101 / 101 / 101 200.0 x 115.0 x 58 25 Pcs

Similar accessories

Check out similar accessories
Service Hotline

Have any questions about our repair and spare parts service?

Mon - Fri:

8:00 – 16.30

BSC Johannesburg Tel: +27 11 493-9375
BSC Cape Town Tel: +27 21 551-2577
BSC Natal Tel: +27 31 701-2120

Application advice

Have any questions about our products and applications?

Mon - Fri:

8:00 – 16.30

Contact Person: Henry Oosthuizen
BSC Spares Requirements: +27 (11) 493 9375
landline number : +27(11) 651 9868
mobile number: +27(82) 773 5600

FAQ

Here you will receive answers to the most frequently asked questions.