GIS 1000 C Professional

Measure temperatures and humidity with precision and document the results with ease


Designed for use in trade and industry. An integrated camera enables measured values to be displayed directly in the corresponding image. These values can also be transferred to a smartphone, tablet or desktop PC.

Dealers

Product video

A concise explanation of the thermo detector’s functions

Application ranges of the GIS 1000 C Professional thermo detector

Designed for use in trades such as heating, ventilation and air conditioning (HVAC), plumbing, electrics, wall and flooring installation or in industry. See the GIS 1000 C Professional in the various application ranges

Advantages and functions at a glance

Measure surface temperatures between -40 °C and +1000 °C simply and without the need for direct contact using the GIS 1000 C Professional thermo detector.

  • Integrated camera for immediately documenting measured values in a photo
  • Connectivity – Measured values can be transferred directly on location to a smartphone via Bluetooth® and then sent by e-mail
  • Quickly acclimatising sensor for precise measurement of room temperature and relative humidity
  • Straightforward user interface for intuitive operation
  • Can be operated with standard alkaline batteries
  • Bright LED for better photos in difficult lighting conditions

Technical data at a glance

Measure temperatures between -40 °C and +1000 °C simply and without the need for direct contact using the Bosch GIS 1000 C Professional thermo detector

User manual (PDF, 38 MB)

Measuring range -40 °C … +1000 °C
Measuring accuracy of IR ±1.0 °C
Optics (Ratio of
measuring distance : measuring spot)
50:1
Resolution 0.1 °C
Measuring accuracy of relative
humidity
±2%
Laser diode Laser class 2, 635 nm
Power supply and
runtime
4x 1.5 V LR6 (AA) (3h)
Frame buffer (number of images) >200
Memory type Internal memory
File format JPEG

Purchase the GIS 1000 C Professional

Order the GIS 1000 C Professional and experience for yourself its versatility.

Dealers

FAQ GIS 1000 C Professional

The tool always measures a circular area between the two laser points. The average temperature inside this area is shown as the measured value on the display. In addition to surface temperature, the tool can measure relative humidity and ambient temperature.

The shorter the distance to the measuring object, the more precise the measurement. Measuring results can become less precise at greater distances, e.g. due to high humidity, which can influence the result.

In order to achieve the best possible result, set which material you are measuring on the tool (emissivity degree). The most commonly used materials are already preset in the GIS 1000 C Professional. However, you can also enter custom values.

In difficult measuring conditions (e.g. measurement inside a ventilation system), you can also connect an external sensor. The tool has a type K connection. As soon as a sensor is connected, the tool will detect it and the sensor’s value will be shown on the display.

The small sensor between trigger and infrared measuring hole precisely measures the relative humidity and ambient temperature. The measured values can be used for different applications:

  • Thermal bridge mode: The measured surface temperature is compared to the ambient temperature in order to detect problems such as inadequate insulation. This is shown on the colour scale and helps the user to interpret the results
  • Dew point mode: The tool can use the ambient temperature and humidity to calculate the dew point. If the measured surface temperature approaches this value, the tool will display this on the interpretation scale.

Measurement begins as soon as the trigger is pressed and ends when the trigger is released.

A thermal imaging camera is used to measure temperature distribution over a larger area. Thousands of measurement points are combined to form an image, delivering a quick overview of critical areas. This helps you, for example, to quickly identify problems in areas on which you have to find temperature differences.

Spot measurement with the GIS 1000 C Professional precisely measures the surface temperature of a small area. In addition, you can also (depending on application and requirement) measure the relative humidity and ambient temperature. The GIS 1000 C Professional is therefore suitable for precise, versatile measurements. It helps with the detailed analysis of small areas and the measurement of individual spots.

Description: This is the ratio of the distance between measuring tool and measuring object to the diameter of the measuring area.

Characteristics: The closer the user holds the tool to the measuring object, the smaller the measuring area and the more precise the measurement.

The greater the distance to the measuring object, the larger the area measured (tapered measurement principle), i.e. the displayed temperature is calculated over a larger area.

Note: In order to obtain exact measured values, the measuring object should be at least as large as the distance between the two laser points.

faq

Yes, each version includes such a certificate in the user manual, which confirms that the tool works within the specifications stipulated in the user manual.

Yes, the tool can be serviced and readjusted in the Service Centre in order to get it working within the stipulated specifications again. The user receives a calibration certificate as proof. To find out whether this service is also available in your region, please contact your local Bosch Service Centre.

Yes, the user can contact his Service Centre and request a calibration. The user receives a calibration certificate as proof. To find out whether this service is also available in your region, please contact your local Bosch Service Centre.

The Measuring Master app can be downloaded in the Apple App Store and in the Google Play Store.

The app is only available for Android and iOS tablets and smartphones. Other operating systems are not supported. Supported Android devices: Bluetooth®-capable smartphones and tablets with Android 4.0 or higher. Supported iOS devices: iPhone (4S or higher), iPad (3rd Gen. or higher), iPad Air (1st Gen. or higher), iPad mini (1st Gen. or higher).

The projects are stored on the smartphone/tablet they were created on and cannot be transferred to other devices.

Yes, your data will be retained when a software update is performed.

Saved content is always retained. To be safe, before you update you should save the projects on your laptop/PC by “sharing” them and forwarding them as a PDF or Excel file to your e-mail address.

Go to “Settings” → “Language” to see which languages the app is available in.

export icon Export

settings iconSettings

bluetooth icon Establish Bluetooth® connection

First make sure that Bluetooth® is activated on the measuring tool and on the smartphone/tablet, and that the devices are within range. In the app you can then use bluetooth icon to establish a Bluetooth® connection between the measuring tool and the smartphone/tablet. Please note that the connection must always be established via the app, not via the settings menu of your smartphone/tablet.

We recommend that you use our GLM Transfer Software, which is available for free download, to transfer measured values from your GLM to your computer. The measurement images taken by the GIS can be transferred to a PC via USB.

No. You can use maximum one measuring tool. Check first whether Bluetooth® is activated on the GLM/GIS and on the smartphone/tablet, and whether both devices are within range. Alternatively, you can open the selection using bluetooth icon.

Depending on on-site conditions (obstacles, sunlight, etc.), it is possible to maintain a connection between your smartphone/tablet and the measuring tool for up to approx. 10 metres.

If the tool has been connected to the app before, it will be automatically recognised when it is reconnected as long as the app is open on the smartphone/tablet, Bluetooth® is activated on both devices and the devices are within range.

a. Measurements with GLM 100 C Professional & GLM 50 C Professional
Under messung icon you can insert distance measurements.

Under flaechenberechnung icon you can insert area calculations. To do so, switch the mode on your GLM to area calculation.

Under winkel icon you can insert angles.

Under notizen icon you can add notes, photos, audio memos and to-do’s.

Under rueckgaengig icon you can undo actions.

Under wiederherstellen icon you can redo undone actions.

Under loeschen icon you can delete individual objects.

The unit of measurement corresponds to the unit selected in the app, regardless of the measuring tool. To change the unit of measurement, switch to “Settings” and select “Units of measurement”. Confirm with “Save”. All existing and new app measurements will be shown in the new selected unit of measurement.

When individual measured values are transferred from a GLM in real time, their time & date is the time & date when the measurement was taken. Please check the time & date set in your smartphone/tablet PC, as the time & date are applied based on the time & date set in your smartphone/tablet PC.

The aluminium rail absorbs a lot of the signal; therefore data transfer via Bluetooth® is not an intended use. However, the measured angle can be stored in the measured value list and can then be transferred once the tool is taken out of the R 60 Professional.

You can enter a measured value using the GLM by plotting an element in the photo and then measuring, selecting a measured value directly from the measured value list or entering it manually.

The best possible image quality is determined by the capabilities of your smartphone/tablet. Before exporting, the app checks the maximum possible image resolution that your device can process and adapts the pixel size. This ensures that the images are exported.

1. Android: The pictures are also stored without measurements in a separate folder in the gallery of the smartphone/tablet.

2. iOS: No pictures are stored in the gallery.

b. Measurements with GIS 1000 C Professional (not available in all countries)

If there is an existing connection between your smartphone/tablet and the GIS 1000 C Professional, measured values can be added directly after setting the measurement point by measuring with the GIS 1000 C Professional or by selecting a measured value from the gallery on the device. If no measurement point is selected, a selection window appears with options for how you can use the measured value. Alternatively, this can be done by tapping and holding the measurement point and then selecting the “Edit” option. In both cases, the measurement point flashes if a measurement can be added directly.

Under messpunkt icon you can insert a new measurement point into your photo.

Under notizen icon you can add or open notes on your file.

Under rueckgaengig icon you can undo actions.

Under wiederherstellen icon you can redo undone actions.

Under loeschen icon you can delete individual objects.

Measured values are stored in the corresponding measurement points which have been set. When you have assigned the measured values to a measurement point, you can open details by tapping on the measurement point.

Yes, you have the option of transferring measured values to the app subsequently. To do this, set or select a measurement point in the app and then go to the gallery in the GIS 1000 C Professional. Here, select the measurement you want and transfer it to the selected measurement point using the Save button in the middle of the GIS 1000 C Professional.

The surface temperature measured is shown in the image regardless of the mode selected. In order to do this, the “Show temperature labels in the sketch” parameter must be activated in the settings.

The measuring mode has to be set directly on the GIS 1000 C Professional. Depending on the mode selected, the corresponding measured values are transferred to the app.

  • Umgebungstemperatur icon Ambient temperature
  • Oberflächentemperatur icon Surface temperature
  • relative Luftfeuchtigkeit icon Relative humidity
  • durchschnittliche Oberflächentemperatur icon Average surface temperature
  • Temperaturunterschied von Oberflächen- zu Raumtemperatur icon Temperature difference between surface and room temperature (thermal bridge)
  • gewählter Emissionsgrad für diese Oberfläche icon Selected emissivity degree for this surface
  • Taupunkttemperatur icon Dew point temperature
  • Differenz der Oberflächentemperatur zur Temperatur des Taupunkts icon Difference between the surface temperature and the dew point temperature

By tapping and holding the measurement point, you have the option of editing (“Edit” – measurement point flashes), moving (“Move” – the measurement point shakes) or deleting (“Delete”) your measurement point.

c. Floor plan – Measured values

The “Detailed Plans” function is suitable for creating detailed floor plans. The wall view function also enables walls to be individually adapted. Angles, doors, windows and sockets can be inserted and their dimensions changed. You can also add texts and audio memos here. This function is especially suitable for architects, civil engineers, estate agents, electrical engineers, etc.

The “Quick Sketch” function enables you to create a floor plan sketch with 90° angles. A Quick Sketch can be converted to a detailed plan. The “Quick Sketch” is deleted after the conversion. This function is especially suitable for everyone who wants to get a quick impression of the floor plan, such as tilers, planners, etc.

If your GLM has a connection to a smartphone/tablet, the measured values are automatically transferred in real time. By clicking on an object (wall or measuring line), you can either assign real-time measured values to this object by measuring with the GLM or you can assign saved measured values from the measured value list.

You can view and use your measured values by selecting an element and sliding up the numeric keypad for manual entry in entry mode.

Maximum 50 measured values are stored across all projects.

d. Floor plan – Drawing area and angles

takes you to selection mode. There you can drag and drop elements to move them, and you can change their properties.

In draw mode you can draw lines, quadrilaterals and polygons.

Under you can insert breakthroughs into the plan.

Under you can add measuring lines to the floor plan.

Under you can insert notes, photos and to-do’s.

takes you to the overview.

You can import existing floor plans as an image using the function.

Under you can undo actions.

Under you can redo undone actions.

Under you can delete individual objects.

Click on a wall in selection mode to go to the “Wall View”. Under settings icon you can then select the corresponding element.

You can set the number of decimal places under settings icon → Decimal places. The app will round off the values from your GLM accordingly.

Yes. The app does so to retain the layout. If the layout and the measured values contradict each other, the measured value will be placed in brackets and shown in blue. Values shown in black are calculated by the program. Using the Lock functions (padlock symbol) you can also lock walls so that they are not automatically adapted.

Select the selection mode auswahlmodus icon to move individual objects.

No. It is currently only possible to move/delete individual objects. This function will be supported with one of the future updates.

Select the display mode and tap on the middle of a wall in order to drag it into the desired position.

No. It is only possible to change the thickness of individual walls subsequently.

Select auswahlmodus icon in draw mode. Tap on a wall, select “Wall View” and then “Select side 1” (inner side)/“Select side 2” (outer side).

No. The wall thickness can be adjusted for all projects using settings icon. Individual walls can be adjusted within a project by selecting the relevant wall.

In draw mode the app supports the standard 1:50 scale.

Currently the common image formats (JPEG, BMP, GIF, PNG) are supported.

Click on symbol winkel icon and then on Angles to display all angles.

You can activate/deactivate angle fixing under settings icon → “Angle at 90°/45°”.

The value you have entered is shown in blue brackets in the floor plan. The angle is not visually adjusted so as not to change the room layout. Alternatively you can change the angles in the plan by adjusting them manually (drag and drop).

The plans are saved automatically.

To export, select Project → Customer data and then tap on Export.

You can send your plans in PDF format by e-mail.

The scale is dynamically adapted to the DIN A4 paper size.

The Power Tools Newsletter

Know straightaway what’s important

The newsletter for professionals ensures that you are always up to date. What can you expect? News, extras and offers as well as exclusive competitions

Top