HSS Slanting Hole Countersink Bit continuously works free of chattering and without leaving burrs
HSS Slanting Hole Countersink Bit continuously works free of chattering and without leaving burrs
The HSS Slanting Hole Countersink Bit continuously works free of chattering and without leaving burrs. Its slanting hole prevents chips from clogging the workpiece and is optimised for chip removal and clean countersinking. The bit is made of HSS (high-speed steel) with a 5% cobalt alloy for best surface quality. This product is suitable for countersinking screws and deburring holes in metal. Use when drilling in non-ferrous metals, alloyed and non-alloyed steel, cast iron and stainless steel. It has a cylindrical shank system and is intended for use in drill stands and drill drivers.
The bit has a countersink angle of 90 degrees and drills best at low cutting speeds.
Part number | Step height | Total length mm | Shank diameter inch | Shank diameter mm | Pack quantity | Price | |
---|---|---|---|---|---|---|---|
2 608 597 511
|
2-5 | 45 | 1/4 | 6 | 1 Pcs |
£25.33
|
|
2 608 597 512
|
5-10 | 48 | 1/4 | 8 | 1 Pcs |
£29.72
|
|
2 608 597 513
|
10-15 | 65 | 1/4 | 10 | 1 Pcs |
£48.80
|